Sonic Shock plasma

Designed to be used for televisions or digital displays that are particularly valuable or that are located in places that have already experienced theft, the Sonic Shock Plasma intimidates thieves with the promise of an even louder siren, while its larger footprint makes it more difficult, damaging, and time consuming for thieves who try to remove it.


122 dB means...

It hurts.
The twin sirens rhythmically combine to produce a third super wave that assaults the eardrums.

We put ear plugs in every kit.

You can hear thieves. They can't hear you.



The Sonic Shock Plasma will fit any equipment which affords a 5 x 15 cm flat surface where it can be mounted.


What's in the Box

You can choose one of four configurations – Standard Sensor or Anchor Point Sensor. Full Kit or Commercial kit.

Full kits have everything you need. Commercial kits EXCLUDE glue and keys, which you order separately.

Sonic Shock Plasma Full kit with Standard Sensor

Standard Sensor + 3 m/10 foot line | Part 100-F

Sonic Shock Plasma Full kit with Anchor Point Sensor

Anchor Point Sensor + 1 m/3 foot line | Part 100-F-AP

Sonic Shock Plasma Commercial kit with Standard Sensor

Standard Sensor + 3 m/10 foot line | Part 100-C

Sonic Shock Plasma Commercial kit with Anchor Point Sensor

Anchor Point Sensor + 1 m/3foot line | Part 100-C

Technical Specifications


Sonic Shock Plasma is an effective anti theft solution for larger and more expensive equipment such as large TVs, digital displays, or digital signs. The alarm will fit anything with a 2 x 5.5 inch (5 x 15 cm) flat surface area for mounting.


Alarm Module: 2 x 5.5 inches x 1.3 inches high (5 x 15 cm x 0.33 cm high) The Sonic Shock Plasma is sufficiently thin to be affixed to the back of most wall mounted flat panel televisions.
Supplied with either:
Standard Sensor Tether: 10 foot / ~ 3 meter cable + 1 foot / ~30 cm diameter loop
Anchor Point Sensor: 3 foot / ~ 1 meter cable

Kit Contents

Full Kits:
Alarm module
Mounting plate
Electronic tether (Either Standard Sensor or Anchor Point Sensor)
Ilco removable core lock
9 volt industrial alkaline battery
Installation & User Guide
Methyl methacrylate glue kit
2 keys

Commercial kits have all the above EXCEPT glue and keys; these items you order separately. Most customers can economize by ordering only 1 glue cartridge for every four Sonic Shock 5 alarms, and only a handful of keys.


Alarm housing: 0.05 inch / 1 mm thick 18 gauge hard grade brushed stainless steel. Mounting plate: 0.125 inch / 3 mm aluminum

Sound Engine

Custom Multice piezo & driver


Ilco 5 wafer cam lock Removable core Available keyed alike or keyed differently (200 combinations) The same key can operate the Sonic Shock Plasma, Sonic Shock 5, and the older Sonic Shock 4, 3, and 2 versions which you may have purchased in previous years.


9 volt industrial alkaline battery 650 milliamp hour capacity 1 microamp monitoring current 800 milliamp current at full alarm

Battery Life

5+ years in monitoring mode (50 years theoretically possible). One hour in full alarm. (In practice the alarm may go much longer, but will be a lower volume.)

Control Processor

Proprietary Sonic Shock single purpose analog computer